Requiring two-factor authentication
Tick or untick Require two-factor sign-in for everyone on Settings → Security. When it is ticked, every company member must be able to prove a second factor before they can open these books. Anyone who cannot is held at their account page until they set one up.
To ask only the people who can change the books and settings, turn on Two-factor for Owners, Administrators and Accountants on the same page instead: it is off until you turn it on, holds anyone in those roles in the same way, and the rule for everyone already covers them.
By default a Google sign-in counts as the second factor (below), so a member who signs in with Google meets this rule without an Easy authenticator. Anyone who has set up an Easy authenticator is asked for its code, whether they sign in with a password or with Google, unless they told Easy to remember the device.
Counting a Google sign-in
Count a Google sign-in as the second factor, on the same page, decides whether a Google sign-in meets the rule above for someone who has not set up an Easy authenticator. It never skips the code of someone who has one. Choose:
- Use Easy's default (the starting choice): follows Project Five's setting for every company, which is on unless they change it. The list shows what it is today.
- On: a Google sign-in counts for this company, whatever Easy's default says.
- Off: a Google sign-in does not meet the rule above, so every member needs an Easy authenticator.
Easy cannot see whether Google asked for a second step, and whoever controls the person's Google account (a Google Workspace administrator, for example) could sign in as them. Choose Off if your team's Google accounts are not your business's own or do not use two-step verification.
Signing in with Google
Link Google by verified email, shown on the same page, is Project Five's setting for every company. While it is on (the default), the first time someone signs in with Google, Easy joins it to the Easy account with the same email address, if Google confirms that address. While it is off, sign in with your email and password first, then go to Profile → Sign-in methods, enter your password (and code) again and choose Link Google. The Google account must use the same email address as your Easy account. Unlinking it there asks for the same and signs you out everywhere.
Google never creates an account: only someone who has been invited can sign in.
Sessions
Easy signs you out when you haven't used it for a while: no typing, clicking or scrolling in any of its tabs. The time is two hours unless Project Five has set another. Five minutes before, it asks whether you're still there; choose Stay signed in to carry on. After signing in again you're back on the page you were on. However busy you are, a session also ends a set time after it signed in (a day unless Project Five has set another).
Changing your password or turning two-factor on or off signs you out on every other device within a few minutes, and anything that opens a company's books stops at once; the page then asks you to sign in again on this browser too. Profile → Sessions → Sign out everywhere does the same on demand, for example after losing a phone. A password reset from the sign-in page, or Project Five resetting your two-factor, also signs every session out.
Remembering a device
When you enter your authenticator code, tick Remember this device for 30 days to skip the code on that browser. You still sign in with your password or Google each time; only the code is skipped, for thirty days from the tick. Leave it unticked on a shared or public computer. Changing or resetting your password, Project Five resetting your two-factor, or Sign out everywhere makes every remembered device ask for the code again. A recovery code never remembers the device.
Document capture and AI
Switch Easy's AI on under Settings → Easy's AI (what it is sent and what you agree to). An AI model reads each captured supplier bill or receipt, uploaded or forwarded by email. Nothing is recorded in your accounts without a person confirming it.
Drafts made for you. When the reading is clean, Easy makes the draft bill itself and it appears under Purchases → Bills with the document attached:
- the supplier is one you already have: the same name, or one supplier whose name partly matches (the draft's notes then say the supplier was guessed, so check it);
- each line is coded from that supplier's earlier bills: a line whose description matches one on them (either containing the other, ignoring capitals and punctuation) takes that line's account, VAT and tags; any other line takes the last bill's first line, or your first expense account with no VAT when there is no earlier bill (the notes say so);
- the notes give the document's total and VAT to compare with the draft.
Matched and Check. On the review page each line the AI read is tagged Matched (coded from an earlier line, or the supplier's bills only ever use one expense type) or Check (a guess). A supplier's document with a Check line waits in the inbox rather than becoming a draft by itself, and Create draft bill stays off until you have opened each Check line (choose its expense type to see the picker; the tag then reads Opened). When the lines to check are all one thing, pick it once in Use this expense type for every line still to check, above the lines: each of them takes it and reads Opened.
Amounts include VAT on the review page says whether the lines' prices already carry their VAT, as a till receipt's do. It starts on when the lines add up to the document's total, off when they add up to its amount before VAT, and otherwise as your company types its bills (Settings → Sales settings). Switch it if Easy read it wrong: the total under the lines should match the document.
Review the draft, change anything, and record it as any other bill: approvals and the lock date apply as usual. Until you do, it is listed in Mail → Waiting for you and tagged AI draft on Purchases → Bills.
Discounts and deposits. A discount, rebate or deposit the supplier took off the bill comes in as its own line with a minus amount, on the same bill, and takes its VAT off with it. A minus line can only be an ordinary expense line (not stock, a fixed asset, import VAT or a purchase order line), and a bill can't add up to less than zero. You can type a minus line on any bill.
Another currency. If your company uses several currencies and has the document's currency switched on, the draft is in that currency at your own rate (Settings → Exchange rates) dated closest to the document. Otherwise Easy converts the lines to your books' currency at the European Central Bank's rate for the document's date, which Easy looks up for you. Either way the draft's notes name the rate used: change it on the bill if you paid at another rate. A currency the central bank doesn't publish (Fijian dollars or Pacific francs, for example) waits in the inbox. Type the rate there and choose Convert.
Tax you can't claim. GST or VAT on a document from abroad (one in another currency) is not Cook Islands VAT, so you can't claim it back. The draft's lines then have no VAT, and the tax goes on a line of its own, "GST/VAT charged by the supplier (not claimable)", on the same account, so the bill adds up to what you pay. The same happens when the supplier's last bill was coded with no VAT.
Credit notes. A document that says it is a credit note, or adds up to less than zero, is set up as a supplier credit note instead of a bill. You can switch between the two on the review page. A credit note is never recorded by itself: your accountant records it from the review page, and its file goes with it.
What waits in the inbox for you (with the reason on the document): no supplier matches, or the name fits several suppliers; the bank details printed on the document differ from the supplier's record; a bill from that supplier already has the same invoice number; the amounts do not add up or look wrong; the date is in the future or before the lock date; another currency with no rate to be had; a credit note. Easy never creates a supplier by itself. Open the document, fix what it says, and choose Create draft bill.
New suppliers. Add as a supplier on the review page starts the new supplier with the name, email and phone number read from the document. Bank details printed on a document are only compared with a supplier's record, never copied into it. When you pick a supplier for a name Easy didn't recognise, Easy remembers it: the next document with that name goes to the same supplier.
A document becomes one bill or credit note only. Its file is then listed with that document's attachments, and its review page links to it instead of offering the actions again.
Which files can be captured
The Bill inbox accepts PDF, JPEG and PNG files up to 10 MB. Easy checks what the file really is, not its name, so a renamed file of another type is refused. Photos taken with the camera button are saved as JPEG. A photo in another format, such as an iPhone HEIC picked from your files, is refused with a message; take it with the camera button or save it as a JPEG first.
Photos. Before a photo is uploaded, your browser shrinks it so its longest side is at most 2,000 pixels, which is plenty to read a bill, and drops the location and camera details stored inside it. Easy removes those details again when it stores the file, so the copy in Easy and the copy sent to the AI carry no location. A sideways phone photo still opens upright.
PDFs. A PDF with a password is refused when you upload it, because nothing can read it: remove the password and upload it again. A PDF of more than 10 pages is kept but is not read by the AI, since cost and time grow with pages and a bill is a page or two. Its review page opens empty with the reason, so you can enter the bill by hand, or capture just the bill's page. A file that could not be read this way costs none of your monthly allowance.
Email-in bills
Every company has its own address for bills, shown on Settings → Email-in bills. It looks like [email protected]. Send or forward an email to it and each PDF, JPEG or PNG attachment goes into the Bill inbox, marked as received by email with the sender and subject. From there it is the same as an upload: the same file checks, the same AI reading if you have AI switched on (or manual entry if not), and nothing is recorded without a person.
Two common ways to use it:
- A rule in your own mailbox. In Outlook, Gmail or your mail program, make a rule that forwards emails from your suppliers (or with "invoice" in the subject) to your Easy address.
- Give it to suppliers. Ask a supplier to send their bills straight to it.
Limits. An email can be up to 25 MB and each attachment up to 10 MB. A document already in the inbox is not added twice. The body of the email is not read; only attachments are. A PDF forwarded "as an attachment" (a whole email attached to another) is found too.
Accepted senders. You can list the addresses or whole domains you accept bills from, one per line ([email protected], or @supplier.co.ck for the whole domain). Email from anyone else is turned away. Where the mail gateway's sender checks (SPF, DKIM, DMARC) are switched on, so is email that only pretends to come from a listed sender; the log line says what the check found. If you forward bills from your own mailbox, list your own address as well, because a forwarded email comes from you. Leave the list empty to accept anyone who has the address.
The email log. The same page lists the last 50 emails and what happened to each: added to the inbox, no attachment, a file of the wrong type, a sender not on your list, and so on. The sender is never told why an email was turned away, so check the log if a supplier says they sent something. Log lines are kept for 90 days.
Change my address. If the address ends up on a mailing list or you start getting junk, choose Change my address. You get a new one straight away and mail to the old one is no longer accepted, so update your forwarding rule and tell your suppliers.
Removing a captured document
Tick documents in the Bill inbox and use Remove selected, or use Remove on the document's review page, for a document you do not want: a photo that did not read, a duplicate, or something uploaded by mistake. Remove unread removes every document AI could not read (it is not offered while AI reading is off, when every upload waits for you by design). Removing happens at once and the notice offers Undo, which puts every document you removed back with its file. Once the notice is gone the file is deleted for good, so you can upload it again later. Removing is recorded in the audit trail with the file name only. A document that has already become a bill cannot be removed here, because it is that bill's attachment. If you undo that bill, or delete it while it is a draft, the document goes back to the Bill inbox so you can make the corrected bill from it (an undone bill keeps its own copy). Uploading a file that is already in the inbox or on a bill is refused; uploading a rejected one, or one whose bill was undone, puts it back in the inbox. Reject keeps the document and its file but marks it as not a bill; rejected documents are hidden until you choose Show rejected. Open a rejected document and choose Restore to inbox to make a bill from it after all. Both are recorded in the audit trail.
Each row in the Bill inbox opens the document, or, once it has become a bill or credit note, that bill or credit note. The link at the end of the row says what the document needs next: Review what Easy read, Enter manually one it could not read, or Open bill.
How long documents are kept
Under Retention on Settings → Easy's AI you can set a number of months. Each night Easy deletes captured documents older than that which never became a bill, together with their files, and erases the AI's reading from documents that did. The file of a document that became a bill stays, because it is that bill's attachment. Leave it empty to keep everything.
Every reading records which model, which version of Easy's instructions and whose key produced it, so a result can be explained later.
Who signed in
Settings → Sign-ins shows the Owner and Administrators who in this company signed in to Easy, newest first: when, the person, how (password, two-factor code, or the provider such as Google), whether it worked, and the browser and device. Failed attempts typed with a member's email address are listed too, so a run of wrong passwords on someone's address shows. Failed attempts only narrows the list. It lists the company's own people only, from the day each joined, and never anyone outside the company. A sign-in opens a person's account, not one company, so someone in two companies shows in both. The newest 200 attempts are shown; Easy keeps the log for a year.