Where pay starts
Compensation starts from an annual salary for salaried staff, or an hourly wage rate for hourly staff. Payroll processing derives the pay for each period from this. PAYE and CINSF are then calculated from the rule tables.
Salaried staff
Annual salary ÷ pay periods per year = gross pay for each period, before overtime, allowances, PAYE and CINSF.
Paid leave for salaried staff has its own Paid leave line at the salary's hourly rate, taken out of the salary, so the two still add up to it.
A salary can be for any number of hours, such as 35 a week or part time. The ordinary hours under Work pattern set the salaried person's hourly rate: gross pay for the period ÷ ordinary hours a period. The employee's Pay & work pattern section shows both. That hourly rate pays hours worked on a public holiday on top of the salary, values a leave payout, and is what the minimum-wage check tests.
The salary pays the usual hours. Other hours are paid at the hourly rate: someone on $43,000 a year for 40 hours a week who works 39 hours in a week is paid 39 hours at that rate. On the pay run, type the hours on the payslip's Salary this period line or in the Employees table, or change Days worked, which sets the hours at the person's usual hours a day. An approved timesheet for a salaried person sets the hours the same way. Leave taken counts towards the hours and is paid on its own Paid leave line. Unpaid leave (leave without pay) comes off the hours the salary pays and is paid nothing, so the salary drops by it. Overtime is paid on top of the salary at time and a half of the hourly rate: type the hours on the payslip's Overtime line. While the usual hours are paid, the salary amount itself can be typed for the period.
Hourly staff
Hourly rate × ordinary hours = gross pay for a standard pay period.
- Overtime pays at ×1.5, and overtime hours a timesheet marks as double time at ×2.
- Approved paid leave is paid at the hourly rate.
Overtime
For hourly employees, hours worked over 40 in a week (Monday to Sunday) receive time and a half (1.5×), whatever column they were entered in. This statutory minimum applies automatically; there is no switch to enable it. When the pay run is built, the excess beyond the overtime already on the timesheet moves from ordinary to overtime.
An employer whose agreements also pay overtime after a number of hours in a day sets that under Payroll settings → Hours & overtime → Hours & overtime. A daily threshold is optional; it is not the statutory weekly rule. Each day's ordinary hours over the cut-off become overtime first, and the weekly test then runs on what is left, so an hour is never counted twice. The rule takes effect on the next pay run built from daily timesheets; salaried staff have no automatic statutory overtime and are not affected. Recalculate on an existing payslip keeps its reviewed hours.
An hourly employee on standard hours needs an approved daily timesheet when those configured hours cross an overtime threshold. This allows each week to be checked separately, including earlier days already paid when a pay period splits a week.
Keep paid rest breaks in paid hours. Subtract a meal break only when it is unpaid under the employment agreement; Easy does not automatically deduct breaks. Where an agreement pays double time (2×) for some overtime, open the day on the timesheet and enter how many of its overtime hours are double time. Those hours are paid as their own line, Double time, and the rest of the day's overtime stays at 1.5×. A timesheet file can carry them too: map its double-time pay code (goPayroll's T3 or DOUBLE) to Double time hours. Double time is for ordinary days; a public holiday worked is paid by the holiday rules. Other contractual rates are not configurable, so review any more generous agreement before relying on the standard calculation.
See the Internal Affairs overtime factsheet for the weekly minimum and the distinction between wages and salary.
Minimum wage
Payroll settings → Minimum wage holds the statutory minimum hourly rate, with the date each rate starts. When the rate changes, add the new rate with its start date and keep the old one: each pay run checks against the rate in force on its pay date.
An hourly employee is checked on their hourly rate. A salaried employee is checked on their period salary spread over their ordinary hours. Anyone below the rate is listed among the people who can't be paid yet (see Employee records), and the pay run will not process them until their pay is put right. With no rate entered, nothing is checked.
Allowances and deductions
Entitlements such as a site allowance or a loan repayment belong on the employee record as pay items, not entered on the payslip each time. Recurring pay items are pulled into each payroll already coded.
A deduction codes to a liability account when the money is owed to someone else (a union, a court, a lender). When it repays money the company lent, such as a staff loan, code it to the asset account the loan sits in, Staff Loans (1320 in the standard chart), which every company has. Record the money lent as a payment from the bank coded to that account, then add the repayment on the person's Pay tab as a recurring pay item: type Deduction, Loan / savings (balance), the balance owing and Staff Loans. Each repayment brings the loan down, and the deduction stops when it reaches nothing.
When someone on the payroll owes on a customer invoice (staff purchases, a store account), open the invoice and choose Deduct from pay… under its receipts: pick the person and how much to take each pay. It is added to their pay items with the invoice's balance owing. Each finished pay run then records a receipt against the invoice for what was deducted, through the Payroll deductions clearing account (added the first time), so the invoice, the customer's statement and the aged debtors show it as paid, and the clearing account is back at nil. A run never takes more than the invoice still owes, and the deduction stops once it is paid. Undoing the pay run undoes its receipt, and the invoice owes again.
Paying a deduction to who it is for
A deduction such as a court order, an RMD arrears notice, union dues or a loan repayment can be paid straight to who it is for. Add them as a supplier with their bank account, then choose them under Paid to on the deduction, with the order or notice number as its Reference.
When anyone on the pay run is paid by bank file, the file includes one payment to them per deduction, carrying that reference, and the run's journal pays it from the bank instead of leaving it owing. A run with nobody paid by bank file (everyone by cheque or cash) leaves it owing, to pay by hand. The supplier's bank details follow the same rule as any other: a change must be confirmed by a different person before the bank file will pay them.
Rate history
Rate history lists every rate the employee has been paid at, newest first. A pay increment closes the previous rate on the day before the new one starts.
What CINSF is taken on
CINSF is taken on gross earnings of every kind, before tax: wages and salary, overtime, allowances (taxable or not), bonuses and other extra emoluments, and leave pay, with no ceiling. Two things paid through payroll are not earnings and are left out:
- A reimbursement: money paying back an expense the employee met, such as mileage, a uniform or a work phone. Mark a non-taxable pay item as Reimbursement (no CINSF), or add it on the pay run as a Reimbursement. An expense claim paid with the pay is always a reimbursement.
- A lump sum paid on leaving: a bonus, gratuity or retiring allowance added as an extra emolument to the pay that runs to the person's last day. Holiday pay paid out when someone leaves still counts.
This follows the CINSF Employer Information Handbook. The monthly CINSF file reports, for each employee, the earnings their contributions were worked out on.
CINSF and age
Employer and employee contributions are calculated at the shared CINSF rate.
- From 18 to 54, CINSF is statutory. There is no opt-out until the employee's 55th birthday.
- From 55 to 59, contributing is the employee's choice.
- Under 18 and from 60, the Act excludes the employee. They may elect to contribute, and the employer then matches. Contributions start or stop automatically on the birthday either way.
The opt-out from 55 and an election outside those ages are set on the employee's Tax & CINSF section.
Contractors
Someone you pay through payroll who is not an employee, such as a builder or cleaner on contract, is added as an employee with Pay as a contractor ticked at the top of the Pay tab. The tab then shows their Contract instead of an employee's pay and work pattern:
- Fee each pay, before VAT: the fixed amount they are paid each pay period. The amount can still be changed on one pay run.
- No PAYE or CINSF is taken, they accrue no leave, they are not on Timesheets, and they are left out of the RM101 certificate, the annual return and box 19 of the RM205.
- Cost account: their fee goes to your Contractors account unless you choose another expense account, such as Subcontractors, so it is not counted as wages. If your chart has no Contractors account, choose one before you save.
If they are VAT registered, they are paid VAT at 15% on top of their fee: a $1,000 fee is paid as $1,150. What happens to the $150 depends on your company:
- Your company is registered for VAT: it is input VAT. It goes to the VAT account and into boxes 11 and 12 of the RM205 and the tax audit.
- Your company is not registered for VAT: it cannot be claimed back, so the whole $1,150 is their cost.
Whether your company is registered is set on Settings → Tax, on Easy Payroll too. There, the VAT is set aside on the RM205 for the VAT return you keep elsewhere, and a VAT Payable account is added to your chart the first time a pay run needs one.
For a VAT-registered contractor, choose what they get with their pay:
- Registered, you issue the invoice (a buyer-created tax invoice; only when your company is registered for VAT): you write the invoice for them, with their agreement. Easy gives it a number (BCTI-year-number) when the pay run is finished and prints it in place of a payslip, with both VAT (RMD) numbers. Keep the signed agreement with the contractor.
- Registered, they invoice you: they send you their own tax invoice, and the payslip shows the fee and the VAT on top.
A contractor's RMD number is their VAT number, so it is needed before they can be paid with VAT.